|
MILLING
DRILLING
TAPPING
ROTARY TOOLING
THREAD MILLS
INDEXABLE INSERTS
YG MILL
- APKT, ADKT, AOMT, APMT
- ENMX - HIGH FEED (HF4)
- ODMT, ODMW, OFER, OFMT, ONHU, ONMU
- PNMU
- RCMT, RDKT, RDKW, RDMT, RDMW, RPMT, RPMW
- SCGT, SDCN, SDKN, SDMT, SDMW, SEGT, SEKN, SEKR, SEKT, SEMT, SNMX, SPCN, SPKN, SPKR, SPMT, SPUN
- TPKN, TPKR, TPUN
- MILLING KITS
- MOUNTING BOLTS
|
|
|
|
|
| Thread Mills |
Home >
Thread Mills > Thread Mills
|
 |
|
|
|
|
THREAD MILLS CARBIDE UN MINIATURE TIALN COATED - L12DE series
|
|
|
|
|
|
|
|
| EDP |
Size |
Pitch |
Cutter Diamter |
Shank Diameter |
Thread Length |
Neck Length |
Overall Length |
No. of Flute |
| TiAlN |
TPI |
D1 |
D2 |
L1 |
Ln |
L2 |
Z |
| L12DE040 | #1 | 64 | 0.055 | 0.25 | 0.047 | 0.165 | 2.5 | 3 |
| L12DE080 | #2 | 56 | 0.065 | 0.25 | 0.054 | 0.197 | 2.5 | 3 |
| L12DE120 | #3 | 48 | 0.075 | 0.25 | 0.063 | 0.236 | 2.5 | 3 |
| L12DE160 | #4 | 40 | 0.083 | 0.25 | 0.075 | 0.236 | 2.5 | 3 |
| L12DE300 | #8 | 36 | 0.13 | 0.25 | 0.083 | 0.343 | 2.5 | 3 |
| L12DE240 | #6 | 32 | 0.1 | 0.25 | 0.094 | 0.292 | 2.5 | 3 |
| L12DE280 | #8 | 32 | 0.126 | 0.25 | 0.094 | 0.394 | 2.5 | 3 |
| L12DE340 | #10 | 32 | 0.15 | 0.25 | 0.094 | 0.406 | 2.5 | 3 |
| L12DE420 | 1/4 | 28 | 0.207 | 0.25 | 0.107 | 0.52 | 2.5 | 3 |
| L12DE320 | #10 | 24 | 0.141 | 0.25 | 0.125 | 0.402 | 2.5 | 3 |
| L12DE460 | 5/16 | 24 | 0.263 | 0.312 | 0.125 | 0.65 | 2.5 | 3 |
| L12DE400 | 1/4 | 20 | 0.192 | 0.25 | 0.15 | 0.528 | 2.5 | 3 |
| L12DE540 | 7/16 | 20 | 0.36 | 0.375 | 0.15 | 0.906 | 2.5 | 4 |
| L12DE440 | 5/16 | 18 | 0.242 | 0.312 | 0.167 | 0.65 | 2.5 | 3 |
| L12DE480 | 3/8 | 16 | 0.264 | 0.375 | 0.188 | 0.752 | 2.5 | 3 |
| L12DE520 | 7/16 | 14 | 0.354 | 0.375 | 0.214 | 0.917 | 2.5 | 4 |
| L12DE560 | 1/2 | 13 | 0.407 | 0.5 | 0.231 | 1.08 | 3 | 4 |
| L12DE600 | 9/16 | 12 | 0.465 | 0.5 | 0.25 | 1.24 | 3.5 | 4 |
|
|
 |
|
