|
MILLING
DRILLING
TAPPING
ROTARY TOOLING
THREAD MILLS
INDEXABLE INSERTS
YG MILL
- APKT, ADKT, AOMT, APMT, APGT
- ENMX - HIGH FEED (HF4)
- ODMT, ODMW, OFER, OFMT, ONHU, ONMU
- PNMU
- RCMT, RDKT, RDKW, RDMT, RDMW, RPMT, RPMW
- SCGT, SDCN, SDKN, SDMT, SDMW, SEGT, SEKN, SEKR, SEKT, SEMT, SNMX, SPCN, SPKN, SPKR, SPMT, SPUN
- TPKN, TPKR, TPUN
- LNKU, LNHU
- MILLING KITS
- MOUNTING BOLTS
|
|
|
|
|
|
2 FLUTE BALL NOSE for RIB PROCESSING X-POWER PRO GM967
|
|
|
|
|
|
|
|
 2 FLUTE BALL NOSE for RIB PROCESSING X-POWER PRO GM967 |
| EDP |
Radius of Ball Nose R (±.001) |
Mill Diameter (D1) |
Shank Diameter (D2) |
Length of Cut (L1) |
Length Below Shank (L3) |
Overall Length (L2) |
Neck Diameter (D3) |
| GM967002 | R1/64 | 1/32 | 1/8 | 3/64 | 7/32 | 2 | 0.029 |
| GM967901 | R1/64 | 1/32 | 1/8 | 3/64 | 5/16 | 2 | 0.029 |
| GM967003 | R.0234 | 3/64 | 1/8 | 1/16 | 7/32 | 2 | 0.045 |
| GM967902 | R.0234 | 3/64 | 1/8 | 1/16 | 9/32 | 2 | 0.045 |
| GM967903 | R.0234 | 3/64 | 1/8 | 1/16 | 1/2 | 2 | 0.045 |
| GM967004 | R1/32 | 1/16 | 1/8 | 3/32 | 5/16 | 2 | 0.060 |
| GM967904 | R1/32 | 1/16 | 1/8 | 3/32 | 1/2 | 2 | 0.060 |
| GM967905 | R1/32 | 1/16 | 1/8 | 3/32 | 5/8 | 2 | 0.060 |
| GM967005 | R.0391 | 5/64 | 1/8 | 1/8 | 5/16 | 2 | 0.076 |
| GM967906 | R.0391 | 5/64 | 1/8 | 1/8 | 5/8 | 2 | 0.076 |
| GM967907 | R.0391 | 5/64 | 1/8 | 1/8 | 3/4 | 2 | 0.076 |
| GM967006 | R3/64 | 3/32 | 1/8 | 9/64 | 5/8 | 2 | 0.090 |
| GM967908 | R3/64 | 3/32 | 1/8 | 9/64 | 3/4 | 2 | 0.090 |
| GM967008 | R1/16 | 1/8 | 1/4 | 3/16 | 5/8 | 2-1/4 | 0.120 |
| GM967909 | R1/16 | 1/8 | 1/4 | 3/16 | 3/4 | 2-1/4 | 0.120 |
|
|
 |
|
