|
MILLING
DRILLING
TAPPING
ROTARY TOOLING
THREAD MILLS
INDEXABLE INSERTS
YG MILL
- APKT, ADKT, AOMT, APMT, APGT
- ENMX - HIGH FEED (HF4)
- ODMT, ODMW, OFER, OFMT, ONHU, ONMU
- PNMU
- RCMT, RDKT, RDKW, RDMT, RDMW, RPMT, RPMW
- SCGT, SDCN, SDKN, SDMT, SDMW, SEGT, SEKN, SEKR, SEKT, SEMT, SNMX, SPCN, SPKN, SPKR, SPMT, SPUN
- TPKN, TPKR, TPUN
- LNKU, LNHU
- MILLING KITS
- MOUNTING BOLTS
|
|
|
|
|
|
X1-EH 2 FLUTE Square Corner (Rib Processing w/ Neck) HPI88 - 2.5mm - 6.0mm diameter
|
|
|
|
|
|
|
|
| EDP No. |
Mill Diameter |
Shank Diameter |
Length of Cut |
Length Below Shank |
Overall Length |
Neck Diameter |
Interference Angle (°) |
Maximum reach lengths according to draft angle |
| D1 |
D2 |
L1 |
L3 |
L2 |
D3 |
0.5" |
1" |
1.5" |
2" |
3" |
| HPI88025 | 2.5 | 4 | 2 | 8 | 50 | 2.4 | 3.91 | 8.46 | 8.76 | 9.07 | 9.41 | 10.18 |
| HPI88807 | 2.5 | 4 | 2 | 12 | 50 | 2.4 | 2.87 | 12.6 | 13.04 | 13.51 | 14.01 | - |
| HPI88808 | 2.5 | 4 | 2 | 16 | 60 | 2.4 | 2.26 | 16.73 | 17.31 | 17.94 | 18.61 | - |
| HPI88809 | 2.5 | 4 | 2 | 20 | 60 | 2.4 | 1.87 | 20.87 | 21.59 | 22.37 | - | - |
| HPI88810 | 2.5 | 4 | 2 | 30 | 70 | 2.4 | 1.3 | 31.2 | 32.29 | - | - | - |
| HPI88811 | 2.5 | 4 | 2 | 40 | 90 | 2.4 | 1 | 41.54 | - | - | - | - |
| HPI88812 | 2.5 | 4 | 2 | 50 | 100 | 2.4 | 0.81 | 51.88 | - | - | - | - |
| HPI88030 | 3 | 6 | 4.5 | 8 | 50 | 2.85 | 6.17 | 8.56 | 8.86 | 9.18 | 9.52 | 10.29 |
| HPI88813 | 3 | 6 | 4.5 | 12 | 50 | 2.85 | 4.8 | 12.69 | 13.14 | 13.61 | 14.12 | 15.27 |
| HPI88814 | 3 | 6 | 4.5 | 16 | 60 | 2.85 | 3.92 | 16.83 | 17.41 | 18.04 | 18.72 | 20.24 |
| HPI88815 | 3 | 6 | 4.5 | 20 | 60 | 2.85 | 3.32 | 20.96 | 21.69 | 22.48 | 23.32 | 25.21 |
| HPI88816 | 3 | 6 | 4.5 | 25 | 70 | 2.85 | 2.78 | 26.13 | 27.04 | 28.02 | 29.07 | - |
| HPI88817 | 3 | 6 | 4.5 | 30 | 70 | 2.85 | 2.39 | 31.3 | 32.39 | 33.56 | 34.82 | - |
| HPI88040 | 4 | 6 | 6 | 12 | 60 | 3.85 | 3.57 | 12.69 | 13.14 | 13.61 | 14.12 | 15.27 |
| HPI88818 | 4 | 6 | 6 | 16 | 60 | 3.85 | 2.86 | 16.83 | 17.41 | 18.04 | 18.72 | - |
| HPI88819 | 4 | 6 | 6 | 20 | 70 | 3.85 | 2.38 | 20.96 | 21.69 | 22.48 | 23.32 | - |
| HPI88820 | 4 | 6 | 6 | 30 | 80 | 3.85 | 1.68 | 31.3 | 32.39 | 33.56 | - | - |
| HPI88821 | 4 | 6 | 6 | 40 | 90 | 3.85 | 1.3 | 41.64 | 43.09 | - | - | - |
| HPI88822 | 4 | 6 | 6 | 50 | 100 | 3.85 | 1.06 | 51.97 | 53.78 | - | - | - |
| HPI88050 | 5 | 6 | 7.5 | 20 | 70 | 4.85 | 1.29 | 20.96 | 21.69 | - | - | - |
| HPI88823 | 5 | 6 | 7.5 | 30 | 80 | 4.85 | 0.89 | 31.3 | - | - | - | - |
| HPI88824 | 5 | 6 | 7.5 | 40 | 90 | 4.85 | 0.68 | 41.64 | - | - | - | - |
| HPI88825 | 5 | 6 | 7.5 | 50 | 100 | 4.85 | 0.55 | 51.97 | - | - | - | - |
| HPI88060 | 6 | 6 | 9 | 20 | 70 | 5.85 | 0 | - | - | - | - | - |
| HPI88826 | 6 | 6 | 9 | 30 | 80 | 5.85 | 0 | - | - | - | - | - |
| HPI88827 | 6 | 6 | 9 | 40 | 90 | 5.85 | 0 | - | - | - | - | - |
| HPI88828 | 6 | 6 | 9 | 50 | 100 | 5.85 | 0 | - | - | - | - | - |
|
|
 |
|
